15 February 2013

Before and After Chair Re-do x2

I had some extra time this week with a change of schedule at school, so I got busy on some projects that I have been wanting to work on for some time.

First of all, I spray-painted a wicker chair.  


I used Rustoleum Oil-Rubbed Bronze.  It is a metallic black, and I really like the way that the light catches the different shades of black in the chair.




This next chair was given to me by a friend who didn't have time to refurbish it.  





The bottom of the chair reads:

"Wisconsin Chair Company, Port Washington, Wis."


I did some research on the internet and found out that this company was in business from 1896 to 1959.  This chair is, at a minimum, 54 years old.  It also said, "Filling Cotton, Covering Spanish Brown Leather."  I was reluctant to get rid of the leather but since it was ripped, I didn't have much choice.



I removed the tacks around the outside, one by one. 


The first one came out whole; the second one was not quite as fortunate.


 I ended up with about 1/3 broken off heads.










I sanded and primed the chair, then painted it with 3 coats of black paint.

I bought a fabric that I thought looked "antique-ish."  I re-used the tacks, but spray- painted them again.

I stapled the fabric over the pad onto the chair, then used hot glue to attached the braided ribbon.  
I marked the holes for the tacks, and re-hammered them into some of the holes.




Here is the Before/After shot: